This GY601 Gyro is an AVCS (Angular Vector Control System) Rate
Gyro developed for model Helicopter Competition and it comes with a
Futaba S9251 Digital Servo designed specifically for the GY601 Gyro.
FEATURES: GY601 gyro-
Super Narrow Pulse (760µs) drive system substantially improves
servo response. An S9251 digital servo is used.
Microcomputer high-speed arithmetic processing substantially
improves gyro response.
High Resolution 12-bit A/D accurately converts the sensor output
to a digital signal
Newest SMM (Silicone Micro Machine) and low-back aeroform case
improves vibration resistance and neutral characteristic.
Amp mounts an LCD that allows accurate data settings.
S9251 servo-
This special servo for the GY601 is compatible with Super Narrow
Pulse (760µs) drive.
Operation speed of 0.07sec/60°; High response is realized.
Alumite case w/heat sink effectively cools the motor from heat.
INCLUDES: One GY601 Amp
One GY601 Sensor
One adjustment screw driver
One manual
One S9251 servo
One mount pad
REQUIRES: 4.8 volt Rx battery ONLY (higher voltage could damage the servo)
Assembly and adjustment onto the helicopter.
SPECS: GY601 Gyro-
Display device: 8-character dot matrix liquid crystal display
Operating Voltage range: DC 3.8V to 6.0V
Current drain: 70mA (@5.0v, including sensor)
Amp Length: 57mm Sensor Length: 34mm
Width: 32mm Width: 34mm
Height: 15mm Height: 18mm
Weight: 34g Weight: 24.5g
S9251 Servo-
Length: 40mm
Width: 20mm
Height: 36.6mm
Weight: 57g
Speed: 0.07sec/60° (at 4.8v)
Torque: 3.7kg-cm (at 4.8v)
COMMENTS: The GY601 can only be used at 4.8V; higher voltage may damage the
servo.
The S9251 is the ONLY servo that can be used with this gyro. No
other servo hsa the frame refresh rate to stand up to this gyros
requirements.
